Observed arrival · 2026-10-26
MK60 ABS: bench checks before the first car
A pre-release browser tool for bleeding, reading faults, and coding standalone MK60E5 ABS units with a K+DCAN cable.
○Open
⊠Login
$Paid
†Ads
✦Pretty
●Pro
◎Niche
◉Human
⚑Risk
ƒJS
- For
- Builders fitting MK60E5 ABS units into swaps and track cars
- Worth noticing
- The described workflow checks for low terminal 30 voltage, pump faults, and end-of-line test mode before allowing a bleed.
Field notes
The described workflow reads unit identification and blocking faults before starting; its bleed sequence proceeds right rear, left rear, right front, then left front, with two roughly 15-second cycles per corner. The page specifies a pressure bleeder at no more than 1.0 bar and a 90-second pump cool-down after repeated retries. The author says command and valve mapping were checked on a bench; a supervised in-car bleed remains outstanding.
Observed signals
Read the marks
Editorial observations of this landing page, not a rating.
○OpenPublic substance visible
✦PrettyNotable craft visible
◎NicheUnusually specific use
One card from the complete issue