Skip to the card

2026-11-17 issue

Observed arrival · 2026-11-17

SheetKerf’s plywood nesting and cut-list studio

sheetkerf.com Visit website
Editorial interest 78/100 Selection signal · not a rating of the site

A browser-based workshop tool for planning sheet-goods and lumber cuts, estimating material use, and preparing CNC or shop-floor exports.

Landing page captured for the 2026-11-17 issue.
For
Cabinetmakers, woodworkers, and CNC shop operators
Worth noticing
The sample kitchen-cabinet project schedules 45 parts across six sheets and estimates 41.1 metres of edge tape, including an 8% trim allowance.

Field notes

Users can choose among sheet presets, set saw or endmill kerf, and enter parts with grain and top/bottom/left/right edge requirements. A displayed cabinet example reports 45 of 45 parts across six sheets, with 32.9% waste and a tape estimate that includes an 8% trim allowance. The page lists paid project-pass and monthly options for CAD/CAM exports; the extracted evidence does not verify the calculations or downloads.

Observed signals

Read the marks

Editorial observations of this landing page, not a rating.

○OpenPublic substance visible
$PaidCommerce or pricing visible
✦PrettyNotable craft visible
●ProPolished or operationally mature
◎NicheUnusually specific use

One card from the complete issue

Real Weather in Mossy Hollow

300,778 arrived 1,000 judged 976 catalogued Enter the complete issue
sheetkerf.com

Landing page observed 2026-11-17. The live site may have changed.