Skip to the card

2026-11-20 issue

Observed arrival · 2026-11-20

Jumper turns a cable spec into a build packet

jumperbuilt.com Visit website
Editorial interest 78/100 Selection signal · not a rating of the site

A browser-based cable-assembly designer that turns a wire list into drawings, a bill of materials, a cut list, a continuity table, and a label file.

Landing page captured for the 2026-11-20 issue.
For
Engineers specifying prototype and low-volume cable assemblies
Worth noticing
A sample FC-to-ESC telemetry harness is labeled HAR-0142, Rev C, with signal, pin, gauge, and color rows.

Field notes

The sample is a six-wire FC-to-ESC telemetry harness, with signals including VBAT, TX, RX, SCL, SDA, and GND mapped between connector pins. Its displayed bill of materials names JST GH and Micro-Fit 3.0 parts, while the design notes describe placing labels and heat shrink by distance from a connector. The page cautions that generated documents should be checked before use.

Observed signals

Read the marks

Editorial observations of this landing page, not a rating.

○OpenPublic substance visible
✦PrettyNotable craft visible
●ProPolished or operationally mature
◎NicheUnusually specific use
ƒJavaScriptBrowser-side code central

One card from the complete issue

The Woven Index

386,049 arrived 1,000 judged 972 catalogued Enter the complete issue
jumperbuilt.com

Landing page observed 2026-11-20. The live site may have changed.