Skip to the card

2026-11-21 issue

Observed arrival · 2026-11-21

Balloon My Drawing turns marked-up PDFs into inspection reports

balloonmydrawing.com Visit website
Editorial interest 78/100 Selection signal · not a rating of the site

A browser-based tool for numbering dimensions on engineering drawing PDFs and building a corresponding inspection report.

Landing page captured for the 2026-11-21 issue.
For
Inspectors and shops checking engineering drawings
Worth noticing
Automatic detection requires selectable text in a CAD-exported PDF; scanned drawings must be ballooned by hand.

Field notes

The sample shows a flanged bushing drawing with seven dimensions and a report preview; its demo measurements are explicitly described as made up. Users can enter results and see whether values fall within tolerance, including when a result lands exactly on a limit. The page distinguishes selectable-text CAD exports from scans and says scanned drawings require manual ballooning.

Observed signals

Read the marks

Editorial observations of this landing page, not a rating.

○OpenPublic substance visible
$PaidCommerce or pricing visible
✦PrettyNotable craft visible
●ProPolished or operationally mature
◎NicheUnusually specific use

One card from the complete issue

Straw-Goat Rehearsal

333,779 arrived 1,000 judged 980 catalogued Enter the complete issue
balloonmydrawing.com

Landing page observed 2026-11-21. The live site may have changed.